Vetenskapliga artiklar och konferensbidrag som publicerats

 

Journalartiklar och konferensbidrag av doktorander inom LIGHTer PhD network (uppdaterad 151113)
/Reference list for publications within LIGHTer PhD network 2014-

The reference list is updated with publications specified by the graduate students in LIGHTer PhD network.


Journal papers

Kristina Karlsson, Erich Schuster, Mats Stading & Mikael Rigdahl, 2015. Foaming behavior of watersoluble
cellulose derivatives: Hydroxypropyl methylcellulose and ethyl hydroxyethyl cellulose.
Cellulose vol. 22, no. 4, pp. 2651‐2664.

Effects of manufacturing constraints on the cost and weight efficiency of integral and differential
automotive composite structures, Journal of Composite Structures, Per Mårtensson, Dan Zenkert,
Malin Åkermo

Cost and weight efficient partitioning of composite automotive structures, Polymer Composites
09/2015; DOI:10.1002/pc.23795, Per Mårtensson, Dan Zenkert, Malin Åkermo

Method for cost and weight‐efficient material diversity and partitioning of a carbon fibre composite
body structure, Per Mårtensson ∙ Dan Zenkert ∙ Malin Åkermo Proceedings of the Institution of
Mechanical Engineers Part D Journal of Automobile Engineering 04/2015

Integral versus differential design for high‐volume manufacturing of composite structures, Per
Mårtensson ∙ Dan Zenkert ∙ Malin Åkermo, Journal of Composite Materials 10/2014; m(23‐October).
DOI:10.1177/0021998314557684 ∙ 1.17 Impact Factor

Molker H, Wilhelmsson D, Gutkin R, Asp LE. Orthotropic criteria for transverse failure of non‐crimp
fabric‐reinforced composites. J. Compos. Mater. [Internet] 2015;Available from:
http://jcm.sagepub.com/cgi/doi/10.1177/0021998315605877

Golling, S, Östlund, R & Oldenburg, M 2016, 'A study on homogenization methods for steels with
varying content of ferrite, bainite and martensite' Journal of Materials Processing Technology.,
10.1016/j.jmatprotec.2015.07.007

2015: H. Molker, D. Wilhelmsson, R. Gutkin, L. E. Asp (2015) Orthotropic criteria for transverse failure
of non‐crimp fabric‐reinforced composites, Journal of Composite Materials, Available online, DOI:
10.1177/0021998315605877

Zamani, Mohammadreza, and Salem Seifeddine. "Assessment of Modification Level in EN AC‐46000
Aluminum Casting Alloys Using Thermal Analysis and Microscopic Evaluation." Light Metals 2015
(2015): 955‐960.

J. Främby, J. Brouzoulis, M. Fagerström, Assessment of two methods for the accurate prediction of
transverse stress distributions in laminates, submitted to Composite structures (2015)

Effects of manufacturing constraints on the cost and weight efficiency of integral and differential
automotive composite structures, Journal of Composite Structures, Per Mårtensson ∙ Dan Zenkert ∙
Malin Åkermo

Cost and weight efficient partitioning of composite automotive structures, Per Mårtensson ∙ Dan
Zenkert ∙ Malin Åkermo, Journal of Polymer Composites 09/2015; DOI:10.1002/pc.23795

Method for cost and weight‐efficient material diversity and partitioning of a carbon fibre composite
body structure, Per Mårtensson ∙ Dan Zenkert ∙ Malin Åkermo, Proceedings of the Institution of
Mechanical Engineers Part D Journal of Automobile Engineering 04/2015

Integral versus differential design for high‐volume manufacturing of composite structures, Per
Mårtensson ∙ Dan Zenkert ∙ Malin Åkermo, Journal of Composite Materials 10/2014; m(23‐October).
DOI:10.1177/0021998314557684 ∙ 1.17 Impact Factor

Conference proceedings

Zamani, Mohammadreza, Salem Seifeddine, and Anders EW Jarfors. "High temperature tensile
deformation behavior and failure mechanisms of an Al–Si–Cu–Mg cast alloy ‐ The microstructural
scale effect." Materials & Design 86 (2015): 361‐370.

Integral or differential design for a cost effective automotive body structure, Per Mårtensson ∙ Dan
Zenkert ∙ Malin Åkermo, ECCM16 ‐ 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS,
Seveille; 06/2014

The effects of cost and weight efficient structural design for manufacturing of composite automotive
body structures, Per Mårtensson ∙ Dan Zenkert ∙ Malin Åkermo, 20th International Conference on
Composite Materials, Copenhagen; 07/2015

T. Ekermann, S.Hallström, Mechanical Characterisation of composites with 3d‐woven reinforcement,
20th International Conference on Composite Materials, Copenhagen, Denmark, July 2015

Wilhelmsson D, Gutkin R, Edgren F, et al. Numerical analysis of the orthotropic transverse strength of
NCF reinforced composites. In: Texcomp‐12 conference, Raleigh, NC, USA, 2015.

Golling, S, Östlund, R & Oldenburg, M 2015, 'Study on fracture in heat affected zones in the vicinity of
spot welds in a steel with tailored material properties'. in M Oldenburg, B Prakash & K Steinhoff
(eds), 5th International Conference Hot Sheet Metal Forming of High‐performance Steel CHS: June 1‐
3, Toronto, Canada : Proceedings. Verlag Wissenschaftliche Scripten, Auerbach, pp. 211‐219.

Casellas, D, Lara, A, Molas, S, Gironès, A, Golling, S & Oldenburg, M 2015, 'Fracture resistance of
tailor tempered microstructures obtained by different press hardening conditions'. in M Oldenburg, B
Prakash & K Steinhoff (eds), 5th International Conference Hot Sheet Metal Forming of Highperformance
Steel CHS: June 1‐3, Toronto, Canada : Proceedings. Verlag Wissenschaftliche Scripten,
Auerbach, pp. 211‐219.

2015: H. Molker, R. Gutkin, L.E. Asp (2015) Implementation of failure criteria for orthotropic non
crimp fabric composite structures, Conference proceeding: Composites2015 – 5th ECCOMAS
thematic conference on the mechanical response of composites, Bristol, UK.

Vorobyev, Alexey, Olivier Arnould, Didier Laux, Roberto Longo, Nico P. van Dijk, and E. Kristofer
Gamstedt. "Characterisation of cubic oak specimens from the Vasa ship and recent wood by means
of quasi‐static loading and resonance ultrasound spectroscopy (RUS)." Holzforschung. 2015

Jim Brouzoulis, Martin Fagerström, Johannes Främby, Jan Krollmann, and Peter Hellström,
MODELLING OF PROPAGATING DELAMINATIONS IN TEXTILE REINFORCED DUROPLAST BEAMS BY AN
ENRICHED SHELL ELEMENT FORMULATION, proceedings of 20th ICCM

Characterization of the microstructure and mechanical behaviour of laser welded AHSS steel by using
Q&P technique in the process, E. Vuorinen, F. Forouzan, S. Gunasekaran, R. Pineda Huitron, T.
Nilsson8th EEIGM conference on Advanced Materials Research‐ Valencia 11‐12 June 2015

Integral or differential design for a cost effective automotive body structure, Per Mårtensson ∙ Dan
Zenkert ∙ Malin Åkermo, ECCM16 ‐ 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS,
Seveille; 06/2014

The effects of cost and weight efficient structural design for manufacturing of composite automotive
body structures, Per Mårtensson ∙ Dan Zenkert ∙ Malin Åkermo, 20th International Conference on
Composite Materials, Copenhagen; 07/2015

Licentiate thesis

Golling, S 2014, Prediction of hardening, localization and fracture of multiphase microstructure in
boron alloyed steel. Licentiate thesis, Luleå tekniska universitet. Licentiate thesis / Luleå University of
Technology